diff --git a/fhem/FHEM/00_THZ.pm b/fhem/FHEM/00_THZ.pm
index 748346b7a..6ea95950b 100644
--- a/fhem/FHEM/00_THZ.pm
+++ b/fhem/FHEM/00_THZ.pm
@@ -2,10 +2,10 @@
# 00_THZ
# $Id$
# by immi 01/2015
-my $thzversion = "0.124";
+my $thzversion = "0.125";
# this code is based on the hard work of Robert; I just tried to port it
# http://robert.penz.name/heat-pump-lwz/
-# http://heatpumpmonitor.penz.name/heatpumpmonitorwiki/
+# http://heatpumpmonitor.penz.name/heatpumpmonit orwiki/
########################################################################################
#
# This programm is free software; you can redistribute it and/or modify
@@ -64,7 +64,7 @@ sub THZ_Set($@);
#
########################################################################################
-my %setsnew = (
+my %sets439 = (
"pOpMode" => {cmd2=>"0A0112", type => "2opmode" }, # 1 Standby bereitschaft; 11 in Automatic; 3 DAYmode; SetbackMode; DHWmode; Manual; Emergency
"p01RoomTempDayHC1" => {cmd2=>"0B0005", argMin => "10", argMax => "28", type =>"5temp", unit =>" °C"},
"p02RoomTempNightHC1" => {cmd2=>"0B0008", argMin => "10", argMax => "28", type =>"5temp", unit =>" °C"},
@@ -84,7 +84,7 @@ my %setsnew = (
"p03RoomTempStandbyHC2SummerMode" => {cmd2=>"0C056A", argMin => "10", argMax => "28", type =>"5temp", unit =>" °C"},
"p16GradientHC2" => {cmd2=>"0C010E", argMin => "0", argMax => "5", type =>"6gradient", unit =>""}, # /100
"p17LowEndHC2" => {cmd2=>"0C059E", argMin => "0", argMax => "20", type =>"5temp", unit =>" K"},
- "p18RoomInfluenceHC2" => {cmd2=>"0C010F", argMin => "0", argMax => "100", type =>"1clean", unit =>" %"},
+ "p18RoomInfluenceHC2" => {cmd2=>"0C010F", argMin => "0", argMax => "100", type =>"0clean", unit =>" %"},
"p04DHWsetDayTemp" => {cmd2=>"0A0013", argMin => "13", argMax => "49", type =>"5temp", unit =>" °C"},
"p05DHWsetNightTemp" => {cmd2=>"0A05BF", argMin => "13", argMax => "49", type =>"5temp", unit =>" °C"},
"p83DHWsetSolarTemp" => {cmd2=>"0A05BE", argMin => "13", argMax => "75", type =>"5temp", unit =>" °C"},
@@ -259,7 +259,7 @@ my %setsnew = (
#
########################################################################################
-my %getsonly = (
+my %getsonly439 = (
# "debug_read_raw_register_slow" => { },
"sSol" => {cmd2=>"16", type =>"16sol", unit =>""},
"sDHW" => {cmd2=>"F3", type =>"F3dhw", unit =>""},
@@ -287,23 +287,30 @@ my %getsonly = (
"party-time" => {cmd2=>"0A05D1", argMin => "00:00", argMax => "23:59", type =>"8party", unit =>""} # value 1Ch 28dec is 7 ; value 1Eh 30dec is 7:30
);
+
+my %getsonly539 = (
+ "sFlowRate" => {cmd2=>"0A033B", cmd3=>"0A033B", type =>"1clean", unit =>" cl/min"},
+ "sHumMaskingTime" => {cmd2=>"0A064F", cmd3=>"0A033B", type =>"1clean", unit =>" min"},
+ "sHumThreshold" => {cmd2=>"0A0650", cmd3=>"0A033B", type =>"1clean", unit =>" %"},
+ );
+%getsonly539=(%getsonly539, %getsonly439);
+
my %getsonly206 = (
-# "debug_read_raw_register_slow" => { },
"sSol" => {cmd2=>"16", type =>"16sol", unit =>""},
- "p01-p12" => {cmd2=>"17", type =>"17pxx", unit =>""},
+ "p01-p12" => {cmd2=>"17", type =>"17pxx206", unit =>""},
"sDHW" => {cmd2=>"F3", type =>"F3dhw", unit =>""},
"sHC1" => {cmd2=>"F4", type =>"F4hc1", unit =>""},
"sHC2" => {cmd2=>"F5", type =>"F5hc2", unit =>""},
- "sHistory" => {cmd2=>"09", type =>"09his", unit =>""},
- "sLast10errors" => {cmd2=>"D1", type =>"D1last", unit =>""},
- "sGlobal" => {cmd2=>"FB", type =>"FBglob", unit =>""}, #allFB
+ "sHistory" => {cmd2=>"09", type =>"09his206", unit =>""},
+ "sLast10errors" => {cmd2=>"D1", type =>"D1last206", unit =>""},
+ "sGlobal" => {cmd2=>"FB", type =>"FBglob206", unit =>""}, #allFB
"sTimedate" => {cmd2=>"FC", type =>"FCtime", unit =>""},
"sFirmware" => {cmd2=>"FD", type =>"FDfirm", unit =>""},
"sFirmware-Id" => {cmd2=>"FE", type =>"FEfirmId", unit =>""},
);
-my %sets=%setsnew;
-my %gets=(%getsonly, %sets);
+my %sets=%sets439;
+my %gets=(%getsonly439, %sets);
my %OpMode = ("1" =>"standby", "11" => "automatic", "3" =>"DAYmode", "4" =>"setback", "5" =>"DHWmode", "14" =>"manual", "0" =>"emergency");
my %Rev_OpMode = reverse %OpMode;
my %OpModeHC = ("1" =>"normal", "2" => "setback", "3" =>"standby", "4" =>"restart", "5" =>"restart");
@@ -313,7 +320,7 @@ my %faultmap = ( "0" =>"n.a.", "1" => "F01_AnodeFault", "2" => "F02_SafetyTempDe
my $firstLoadAll = 0;
my $noanswerreceived = 0;
my $internalHash;
-
+
########################################################################################
#
# THZ_Initialize($)
@@ -358,7 +365,8 @@ sub THZ_Initialize($)
."interval_sElectrHCTotal:0,3600,7200,28800,43200,86400 "
."interval_sBoostDHWTotal:0,3600,7200,28800,43200,86400 "
."interval_sBoostHCTotal:0,3600,7200,28800,43200,86400 "
- ."firmware:new,2.06 "
+ ."interval_sFlowRate:0,3600,7200,28800,43200,86400 "
+ ."firmware:4.39,2.06,5.39 "
. $readingFnAttributes;
$data{FWEXT}{"/THZ_PrintcurveSVG"}{FUNC} = "THZ_PrintcurveSVG";
@@ -541,7 +549,7 @@ sub THZ_Set($@){
my $argMin = $cmdhash->{argMin};
#next line disables write back for old firmware if the attribute 206 is set.
- return "set not allowed for old firmwares" if((AttrVal($hash->{NAME}, "firmware" , "new") eq "2.06"));
+ return "set not allowed for old firmwares" if((AttrVal($hash->{NAME}, "firmware" , "4.39") eq "2.06"));
# check the parameter range
given ($cmdhash->{type}) {
@@ -993,17 +1001,34 @@ my %parsinghash = (
[" compressorDHW: ", 12, 4, "hex", 1], [" boosterDHW: ", 16, 4, "hex", 1],
[" boosterHeating: ", 20, 4, "hex", 1]
],
+ "09his206" => [["operatingHours1: ", 4, 4, "hex", 1], [" operatingHours2: ", 8, 4, "hex", 1],
+ [" heatingHours: ", 12, 4, "hex", 1], [" DHWhours: ", 16, 4, "hex", 1],
+ [" coolingHours: ", 20, 4, "hex", 1]
+ ],
"16sol" => [["collector_temp: ", 4, 4, "hex2int", 10], [" dhw_temp: ", 8, 4, "hex2int", 10],
[" flow_temp: ", 12, 4, "hex2int", 10], [" ed_sol_pump_temp: ", 16, 4, "hex2int", 10],
[" x20: ", 20, 4, "hex2int", 1], [" x24: ", 24, 4, "hex2int", 1],
[" x28: ", 28, 4, "hex2int", 1], [" x32: ", 32, 2, "hex2int", 1]
],
+ "17pxx206" => [["p01RoomTempDay: ", 4, 4, "hex", 10], [" p02RoomTempNight: ", 8, 4, "hex", 10],
+ [" p03RoomTempStandby: ", 12, 4, "hex", 10], [" p04DHWsetDayTemp: ", 16, 4, "hex", 10],
+ [" p05DHWsetNightTemp: ", 20, 4, "hex", 10], [" p06DHWsetStandbyTemp: ", 24, 4, "hex", 10],
+ [" p07FanStageDay: ", 28, 2, "hex", 1], [" p08FanStageNight: ", 30, 4, "hex", 1],
+ [" p09FanStageStandby: ", 32, 2, "hex", 1], [" p10RoomTempManual: ", 34, 4, "hex", 10],
+ [" p11DHWsetManualTemp: ", 38, 4, "hex", 10], [" p12FanStageManual: ", 42, 2, "hex", 1],
+ ],
"D1last" => [["number_of_faults: ", 4, 2, "hex", 1],
[" fault0CODE: ", 8, 2, "faultmap", 1], [" fault0TIME: ", 12, 4, "turnhex2time", 1], [" fault0DATE: ", 16, 4, "turnhexdate", 100],
[" fault1CODE: ", 20, 2, "faultmap", 1], [" fault1TIME: ", 24, 4, "turnhex2time", 1], [" fault1DATE: ", 28, 4, "turnhexdate", 100],
[" fault2CODE: ", 32, 2, "faultmap", 1], [" fault2TIME: ", 36, 4, "turnhex2time", 1], [" fault2DATE: ", 40, 4, "turnhexdate", 100],
[" fault3CODE: ", 44, 2, "faultmap", 1], [" fault3TIME: ", 48, 4, "turnhex2time", 1], [" fault3DATE: ", 52, 4, "turnhexdate", 100]
],
+ "D1last206" => [["number_of_faults: ", 4, 2, "hex", 1],
+ [" fault0CODE: ", 8, 4, "faultmap", 1], [" fault0TIME: ", 12, 4, "hex2time", 1], [" fault0DATE: ", 16, 4, "hexdate", 100],
+ [" fault1CODE: ", 20, 4, "faultmap", 1], [" fault1TIME: ", 24, 4, "hex2time", 1], [" fault1DATE: ", 28, 4, "hexdate", 100],
+ [" fault2CODE: ", 32, 4, "faultmap", 1], [" fault2TIME: ", 36, 4, "hex2time", 1], [" fault2DATE: ", 40, 4, "hexdate", 100],
+ [" fault3CODE: ", 44, 4, "faultmap", 1], [" fault3TIME: ", 48, 4, "hex2time", 1], [" fault3DATE: ", 52, 4, "hexdate", 100]
+ ],
"F3dhw" => [["dhw_temp: ", 4, 4, "hex2int", 10], [" outside_temp: ", 8, 4, "hex2int", 10],
[" dhw_set_temp: ", 12, 4, "hex2int", 10], [" comp_block_time: ", 16, 4, "hex2int", 1],
[" x20: ", 20, 4, "hex2int", 1], [" heat_block_time: ", 24, 4, "hex2int", 1],
@@ -1045,6 +1070,27 @@ my %parsinghash = (
[" actualPower_Qc: ", 94, 8, "esp_mant", 1], [" actualPower_Pel: ", 102, 8, "esp_mant", 1],
[" collectorTemp: ", 4, 4, "hex2int", 10], [" insideTemp: ", 32, 4, "hex2int", 10] #, [" x84: ", 84, 4, "donottouch", 1]
],
+ "FBglob206" => [["outsideTemp: ", 8, 4, "hex2int", 10], [" flowTemp: ", 12, 4, "hex2int", 10],
+ [" returnTemp: ", 16, 4, "hex2int", 10], [" hotGasTemp: ", 20, 4, "hex2int", 10],
+ [" dhwTemp: ", 24, 4, "hex2int", 10], [" flowTempHC2: ", 28, 4, "hex2int", 10],
+ [" evaporatorTemp: ", 36, 4, "hex2int", 10], [" condenserTemp: ", 40, 4, "hex2int", 10],
+ [" mixerOpen: ", 47, 1, "bit1", 1], [" mixerClosed: ", 47, 1, "bit0", 1],
+ [" heatPipeValve: ", 45, 1, "bit3", 1], [" diverterValve: ", 45, 1, "bit2", 1],
+ [" dhwPump: ", 45, 1, "bit1", 1], [" heatingCircuitPump: ", 45, 1, "bit0", 1],
+ [" solarPump: ", 44, 1, "bit2", 1], [" compressor: ", 44, 1, "bit0", 1],
+ [" boosterStage3: ", 44, 1, "bit3", 1], [" boosterStage2: ", 44, 1, "n.a.", 1],
+ [" boosterStage1: ", 44, 1, "bit1", 1], [" highPressureSensor: ", 49, 1, "n.a.", 1],
+ [" lowPressureSensor: ", 49, 1, "n.a.", 1], [" evaporatorIceMonitor: ", 49, 1, "n.a.", 1],
+ [" signalAnode: ", 49, 1, "n.a.", 1], [" evuRelease: ", 48, 1, "n.a.", 1],
+ [" ovenFireplace: ", 48, 1, "n.a.", 1], [" STB: ", 48, 1, "n.a.", 1],
+ [" outputVentilatorPower: ", 48, 2, "hex", 1], [" inputVentilatorPower: ", 50, 2, "hex", 1], [" mainVentilatorPower: ", 52, 2, "hex", 1],
+ [" outputVentilatorSpeed: ", 56, 2, "hex", 1], [" inputVentilatorSpeed: ", 58, 2, "hex", 1], [" mainVentilatorSpeed: ", 60, 2, "hex", 1],
+ [" outside_tempFiltered: ", 64, 4, "hex2int", 10], [" relHumidity: ", 70, 4, "n.a.", 1],
+ [" dewPoint: ", 82, 4, "n.a.", 1],
+ [" P_Nd: ", 86, 4, "n.a.", 1], [" P_Hd: ", 90, 4, "n.a.", 1],
+ [" actualPower_Qc: ", 94, 8, "n.a.", 1], [" actualPower_Pel: ", 102, 8, "n.a.", 1],
+ [" collectorTemp: ", 4, 4, "hex2int", 10], [" insideTemp: ", 32, 4, "hex2int", 10] #, [" x84: ", 84, 4, "donottouch", 1]
+ ],
"FCtime" => [["Weekday: ", 4, 1, "weekday", 1], [" Hour: ", 6, 2, "hex", 1],
[" Min: ", 8, 2, "hex", 1], [" Sec: ", 10, 2, "hex", 1],
[" Date: ", 12, 2, "year", 1], ["/", 14, 2, "hex", 1],
@@ -1072,83 +1118,6 @@ my %parsinghash = (
"9holy" => [["", 10, 2, "quater", 1]
]
);
-
-my %parsinghash206 = (
- #msgtype => parsingrule
- "09his" => [["operatingHours1: ", 4, 4, "hex", 1], [" operatingHours2: ", 8, 4, "hex", 1],
- [" heatingHours: ", 12, 4, "hex", 1], [" DHWhours: ", 16, 4, "hex", 1],
- [" coolingHours: ", 20, 4, "hex", 1]
- ],
- "16sol" => [["collector_temp: ", 4, 4, "hex2int", 10], [" dhw_temp: ", 8, 4, "hex2int", 10],
- [" flow_temp: ", 12, 4, "hex2int", 10], [" ed_sol_pump_temp: ", 16, 4, "hex2int", 10],
- [" x20: ", 20, 4, "hex2int", 1], [" x24: ", 24, 4, "hex2int", 1],
- [" x28: ", 28, 4, "hex2int", 1], [" x32: ", 32, 2, "hex2int", 1]
- ],
- "17pxx" => [["p01RoomTempDay: ", 4, 4, "hex", 10], [" p02RoomTempNight: ", 8, 4, "hex", 10],
- [" p03RoomTempStandby: ", 12, 4, "hex", 10], [" p04DHWsetDayTemp: ", 16, 4, "hex", 10],
- [" p05DHWsetNightTemp: ", 20, 4, "hex", 10], [" p06DHWsetStandbyTemp: ", 24, 4, "hex", 10],
- [" p07FanStageDay: ", 28, 2, "hex", 1], [" p08FanStageNight: ", 30, 4, "hex", 1],
- [" p09FanStageStandby: ", 32, 2, "hex", 1], [" p10RoomTempManual: ", 34, 4, "hex", 10],
- [" p11DHWsetManualTemp: ", 38, 4, "hex", 10], [" p12FanStageManual: ", 42, 2, "hex", 1],
- ],
- "D1last" => [["number_of_faults: ", 4, 2, "hex", 1],
- [" fault0CODE: ", 8, 4, "faultmap", 1], [" fault0TIME: ", 12, 4, "hex2time", 1], [" fault0DATE: ", 16, 4, "hexdate", 100],
- [" fault1CODE: ", 20, 4, "faultmap", 1], [" fault1TIME: ", 24, 4, "hex2time", 1], [" fault1DATE: ", 28, 4, "hexdate", 100],
- [" fault2CODE: ", 32, 4, "faultmap", 1], [" fault2TIME: ", 36, 4, "hex2time", 1], [" fault2DATE: ", 40, 4, "hexdate", 100],
- [" fault3CODE: ", 44, 4, "faultmap", 1], [" fault3TIME: ", 48, 4, "hex2time", 1], [" fault3DATE: ", 52, 4, "hexdate", 100]
- ],
- "F3dhw" => [["dhw_temp: ", 4, 4, "hex2int", 10], [" outside_temp: ", 8, 4, "hex2int", 10],
- [" dhw_set_temp: ", 12, 4, "hex2int", 10], [" comp_block_time: ", 16, 4, "hex2int", 1],
- [" x20: ", 20, 4, "hex2int", 1], [" heat_block_time: ", 24, 4, "hex2int", 1],
- [" x28: ", 28, 4, "hex2int", 1], [" x32: ", 32, 4, "hex2int", 1],
- [" x36: ", 36, 4, "hex", 1]
- ],
- "F4hc1" => [["outsideTemp: ", 4, 4, "hex2int", 10], [" x08: ", 8, 4, "hex2int", 10],
- [" returnTemp: ", 12, 4, "hex2int", 10], [" integralHeat: ", 16, 4, "hex2int", 1],
- [" flowTemp: ", 20, 4, "hex2int", 10], [" heatSetTemp: ", 24, 4, "hex2int", 10],
- [" heatTemp: ", 28, 4, "hex2int", 10], #[" x32: ", 32, 4, "hex2int", 1],
- [" seasonMode: ", 38, 2, "somwinmode", 1],#[" x40: ", 40, 4, "hex2int", 1],
- [" integralSwitch: ", 44, 4, "hex2int", 1], [" opMode: ", 48, 2, "opmodehc", 1],
- #[" x52: ", 52, 4, "hex2int", 1],
- [" roomSetTemp: ", 56, 4, "hex2int", 10]
- ],
- "F5hc2" => [["outsideTemp: ", 4, 4, "hex2int", 10], [" returnTemp: ", 8, 4, "hex2int", 10],
- [" vorlaufTemp: ", 12, 4, "hex2int", 10], [" heatSetTemp: ", 16, 4, "hex2int", 10],
- [" heatTemp: ", 20, 4, "hex2int", 10], [" stellgroesse: ", 24, 4, "hex2int", 10],
- [" seasonMode: ", 30, 2, "somwinmode", 1],[" opMode: ", 36, 2, "opmodehc", 1]
- ],
- "FBglob" => [["outsideTemp: ", 8, 4, "hex2int", 10], [" flowTemp: ", 12, 4, "hex2int", 10],
- [" returnTemp: ", 16, 4, "hex2int", 10], [" hotGasTemp: ", 20, 4, "hex2int", 10],
- [" dhwTemp: ", 24, 4, "hex2int", 10], [" flowTempHC2: ", 28, 4, "hex2int", 10],
- [" evaporatorTemp: ", 36, 4, "hex2int", 10], [" condenserTemp: ", 40, 4, "hex2int", 10],
- [" mixerOpen: ", 45, 1, "n.a.", 1], [" mixerClosed: ", 45, 1, "n.a.", 1],
- [" heatPipeValve: ", 45, 1, "n.a.", 1], [" diverterValve: ", 45, 1, "n.a.", 1],
- [" dhwPump: ", 44, 1, "n.a.", 1], [" heatingCircuitPump: ", 44, 1, "n.a.", 1],
- [" solarPump: ", 44, 1, "n.a.", 1], [" compressor: ", 47, 1, "n.a.", 1],
- [" boosterStage3: ", 46, 1, "n.a.", 1], [" boosterStage2: ", 46, 1, "n.a.", 1],
- [" boosterStage1: ", 46, 1, "n.a.", 1], [" highPressureSensor: ", 49, 1, "n.a.", 1],
- [" lowPressureSensor: ", 49, 1, "n.a.", 1], [" evaporatorIceMonitor: ", 49, 1, "n.a.", 1],
- [" signalAnode: ", 49, 1, "n.a.", 1], [" evuRelease: ", 48, 1, "n.a.", 1],
- [" ovenFireplace: ", 48, 1, "n.a.", 1], [" STB: ", 48, 1, "n.a.", 1],
- [" outputVentilatorPower: ", 48, 2, "hex", 1], [" inputVentilatorPower: ", 50, 2, "hex", 1], [" mainVentilatorPower: ", 52, 2, "hex", 1],
- [" outputVentilatorSpeed: ", 56, 2, "hex", 1], [" inputVentilatorSpeed: ", 58, 2, "hex", 1], [" mainVentilatorSpeed: ", 60, 2, "hex", 1],
- [" outside_tempFiltered: ", 64, 4, "hex2int", 10], [" relHumidity: ", 70, 4, "n.a.", 1],
- [" dewPoint: ", 82, 4, "n.a.", 1],
- [" P_Nd: ", 86, 4, "n.a.", 1], [" P_Hd: ", 90, 4, "n.a.", 1],
- [" actualPower_Qc: ", 94, 8, "n.a.", 1], [" actualPower_Pel: ", 102, 8, "n.a.", 1],
- [" collectorTemp: ", 4, 4, "hex2int", 10], [" insideTemp: ", 32, 4, "hex2int", 10] #, [" x84: ", 84, 4, "donottouch", 1]
- ],
- "FCtime" => [["Weekday: ", 4, 1, "weekday", 1], [" Hour: ", 6, 2, "hex", 1],
- [" Min: ", 8, 2, "hex", 1], [" Sec: ", 10, 2, "hex", 1],
- [" Date: ", 12, 2, "year", 1], ["/", 14, 2, "hex", 1],
- ["/", 16, 2, "hex", 1]
- ],
- "FEfirmId" => [["Date: ", 36, 22, "hex2ascii", 1]
- ],
- "FDfirm" => [["version: ", 4, 4, "hex", 100]
- ]
-);
-
my ($hash,$message) = @_;
#$message= "A5FB00C50067010700DC011101B2000000E700AD00F3001C000000CE000000000063000000000000000000";
@@ -1181,7 +1150,6 @@ my %parsinghash206 = (
}
}
$parsingrule = $parsinghash{$msgtype} if(defined($msgtype));
- $parsingrule = $parsinghash206{$msgtype} if((defined($msgtype)) and (AttrVal($hash->{NAME}, "firmware" , "new") eq "2.06"));
my $ParsedMsg = $message;
if(defined($parsingrule)) {
@@ -1265,7 +1233,7 @@ sub THZ_debugread($){
($err, $msg) = THZ_ReadAnswer($hash);
# ack datatranfer and read from the heatpump
THZ_Write($hash, "10");
- select(undef, undef, undef, 0.110);
+ select(undef, undef, undef, 0.10);
($err, $msg) = THZ_ReadAnswer($hash);
THZ_Write($hash, "10");
@@ -1293,19 +1261,27 @@ sub THZ_Attr(@) {
my ($cmd, $name, $attrName, $attrVal) = @_;
my $hash = $defs{$name};
- if (( $attrName eq "firmware" ) and ($attrVal eq "2.06")) {
- THZ_RemoveInternalTimer("THZ_GetRefresh");
- %sets = ();
- %gets = %getsonly206;
- THZ_Refresh_all_gets($hash);
- }
- if (( $attrName eq "firmware" ) and (($attrVal eq "new") or ($cmd eq "del")) ) {
- THZ_RemoveInternalTimer("THZ_GetRefresh");
- %sets=%setsnew;
- %gets=(%getsonly, %sets);
- THZ_Refresh_all_gets($hash);
+ if ( $attrName eq "firmware" ) {
+ if ($attrVal eq "2.06") {
+ THZ_RemoveInternalTimer("THZ_GetRefresh");
+ %sets = ();
+ %gets = %getsonly206;
+ THZ_Refresh_all_gets($hash);
+ }
+ if ($attrVal eq "5.39") {
+ THZ_RemoveInternalTimer("THZ_GetRefresh");
+ %sets=%sets439;
+ %gets=(%getsonly539, %sets);
+ THZ_Refresh_all_gets($hash);
+ }
+ if (($attrVal eq "4.39") or ($cmd eq "del") or (($attrVal ne "5.39") and ($attrVal ne "2.06")) ) {
+ THZ_RemoveInternalTimer("THZ_GetRefresh");
+ %sets=%sets439;
+ %gets=(%getsonly439, %sets);
+ THZ_Refresh_all_gets($hash);
+ }
}
@@ -1566,6 +1542,14 @@ return ($FW_RETTYPE, $ret);
attr Mythz firmware 2.06
+ This module is starting to support newer firmware 5.39; the following attribute adapts decoding
+
+
+ attr Mythz firmware 5.39
+
+
+ If no attribute firmware is set, it is assumed your firmware is compatible with 4.39.
+