diff --git a/fhem/CHANGED b/fhem/CHANGED index bfdcbbdf3..a90632456 100644 --- a/fhem/CHANGED +++ b/fhem/CHANGED @@ -1,5 +1,11 @@ # Add changes at the top of the list. Keep it in ASCII, and 80-char wide. # Do not insert empty lines here, update check depends on it. + - feature: 49_SSCAM: added function "svsinfo" to get informations about + installed SVS-package + - bugfix: 49_SSCAM: saved Credentials were deleted if a device will be + deleted + - change: 49_SSCAM: if Availability = "disconnected" then "state"-value + will be "disconnected" too - feature: 70_Pushalot: added support for TimeToLive parameter. - bugfix: 60_allergy: fixed invalid readings names - bugfix: 73_km200: Little Bugfix with the use around Regular Expressions diff --git a/fhem/FHEM/49_SSCam.pm b/fhem/FHEM/49_SSCam.pm index e7553543f..6f4e5783f 100644 --- a/fhem/FHEM/49_SSCam.pm +++ b/fhem/FHEM/49_SSCam.pm @@ -27,6 +27,9 @@ ########################################################################################################## # Versions History: # +# 1.10 02.02.2016 added function "svsinfo" to get informations about installed SVS-package, +# if Availability = "disconnected" then "state" will be "disconnected" too, +# Credentials were deleted if a device will be deleted # 1.9.1 31.01.2016 a little bit code optimization # 1.9 28.01.2016 fixed the problem a recording may still stay active if fhem # will be restarted after a recording was triggered and @@ -121,7 +124,8 @@ sub SSCam_Define { # benötigte API's in $hash einfügen $hash->{HELPER}{APIINFO} = "SYNO.API.Info"; # Info-Seite für alle API's, einzige statische Seite ! - $hash->{HELPER}{APIAUTH} = "SYNO.API.Auth"; + $hash->{HELPER}{APIAUTH} = "SYNO.API.Auth"; + $hash->{HELPER}{APISVSINFO} = "SYNO.SurveillanceStation.Info"; $hash->{HELPER}{APIEXTREC} = "SYNO.SurveillanceStation.ExternalRecording"; $hash->{HELPER}{APICAM} = "SYNO.SurveillanceStation.Camera"; $hash->{HELPER}{APISNAPSHOT} = "SYNO.SurveillanceStation.SnapShot"; @@ -140,7 +144,7 @@ sub SSCam_Define { # Subroutine Watchdog-Timer starten (sollen Cam-Infos abgerufen werden ?), verzögerter zufälliger Start 0-60s InternalTimer(gettimeofday()+int(rand(60)), "watchdogpollcaminfo", $hash, 0); - recstoponboot($hash); # check ob nach Reboot alle Recordings aus -> sonst stoppen + initonboot($hash); # initiale Rotinen nach Restart ausführen return undef; } @@ -148,10 +152,17 @@ return undef; sub SSCam_Undef { my ($hash, $arg) = @_; + my $index = $hash->{TYPE}."_".$hash->{NAME}."_credentials"; + + # gespeicherte Credentials löschen + setKeyValue($index, undef); + RemoveInternalTimer($hash); + return undef; } + sub SSCam_Attr { my ($cmd,$name,$aName,$aVal) = @_; # $cmd can be "del" or "set" @@ -174,87 +185,88 @@ return undef; sub SSCam_Set { my ($hash, @a) = @_; return "\"set X\" needs at least an argument" if ( @a < 2 ); - my $name = $a[0]; - my $opt = $a[1]; - my $prop = $a[2]; - my $prop1 = $a[3]; - - my %SSCam_sets = ( - "credentials" => "credentials", - "on" => "on", - "off" => "off", - "snap" => "snap:", - "enable" => "enable", - "disable" => "disable", - # "expmode" => "expmode", - # "presets" => "presets", - ); + my $name = $a[0]; + my $opt = $a[1]; + my $prop = $a[2]; + my $prop1 = $a[3]; + my $camname = $hash->{CAMNAME}; + my $success; + my $logstr; + my $setlist; + # my $list .= "on off snap enable disable on-for-timer"; # return SetExtensions($hash, $list, $name, $opt) if( $opt eq "?" ); # return SetExtensions($hash, $list, $name, $opt) if( !grep( $_ =~ /^\Q$opt\E($|:)/, split( ' ', $list ) ) ); - - my $camname = $hash->{CAMNAME}; - my $success; - my $logstr; - my @cList; - - - # ist die angegebene Option verfügbar ? - if(!defined($SSCam_sets{$opt})) - { - @cList = keys(%SSCam_sets); - return "Unknown argument $opt, choose one of " . join(" ", @cList); - - } - else - { - if ($opt ne "credentials" and !$hash->{CREDENTIALS}) {return "Credentials of $name are not set - make sure you've set it with \"set $name credentials username password\"";} + $setlist = "Unknown argument $opt, choose one of ". + "credentials ". + # "expmode ". + "on ". + "off ". + "snap ". + "enable ". + "disable ". + ((ReadingsVal("$name", "DeviceType", "Camera") eq "PTZ") ? "presets:".ReadingsVal("$name", "Presets", "")." " : ""); - if ($opt eq "on") - { - - if (defined($prop)) { - unless ($prop =~ /^\d+$/) { return " The Value for \"$opt\" is not valid. Use only figures 0-9 without decimal places !";} - $hash->{HELPER}{RECTIME_TEMP} = $prop; - } - - &camstartrec($hash); + + if ($opt eq "on") { + if (!$hash->{CREDENTIALS}) {return "Credentials of $name are not set - make sure you've set it with \"set $name credentials username password\"";} + if (defined($prop)) { + unless ($prop =~ /^\d+$/) { return " The Value for \"$opt\" is not valid. Use only figures 0-9 without decimal places !";} + $hash->{HELPER}{RECTIME_TEMP} = $prop; + } + &camstartrec($hash); - } - elsif ($opt eq "off") - { - &camstoprec($hash); - } - elsif ($opt eq "snap") - { - &camsnap($hash); - } - elsif ($opt eq "enable") - { - &camenable($hash); - } - elsif ($opt eq "disable") - { - &camdisable($hash); - } - elsif ($opt eq "credentials") - { - return "Credentials are incomplete, use username password" if (!$prop || !$prop1); + } + elsif ($opt eq "off") + { + if (!$hash->{CREDENTIALS}) {return "Credentials of $name are not set - make sure you've set it with \"set $name credentials username password\"";} + &camstoprec($hash); + } + elsif ($opt eq "snap") + { + if (!$hash->{CREDENTIALS}) {return "Credentials of $name are not set - make sure you've set it with \"set $name credentials username password\"";} + &camsnap($hash); + } + elsif ($opt eq "enable") + { + if (!$hash->{CREDENTIALS}) {return "Credentials of $name are not set - make sure you've set it with \"set $name credentials username password\"";} + &camenable($hash); + } + elsif ($opt eq "disable") + { + if (!$hash->{CREDENTIALS}) {return "Credentials of $name are not set - make sure you've set it with \"set $name credentials username password\"";} + &camdisable($hash); + } + elsif ($opt eq "credentials") + { + return "Credentials are incomplete, use username password" if (!$prop || !$prop1); - ($success) = setcredentials($hash,$prop,$prop1); - return $success ? "Username and Password saved successfully" : "Error while saving Username / Password - see logfile for details"; - } - elsif ($opt eq "expmode") - { - &camexpmode($hash); - } - } -return undef; + ($success) = setcredentials($hash,$prop,$prop1); + return $success ? "Username and Password saved successfully" : "Error while saving Username / Password - see logfile for details"; + } + elsif ($opt eq "expmode") + { + if (!$hash->{CREDENTIALS}) {return "Credentials of $name are not set - make sure you've set it with \"set $name credentials username password\"";} + &camexpmode($hash); + } + elsif ($opt eq "presets") + { + if (!$hash->{CREDENTIALS}) {return "Credentials of $name are not set - make sure you've set it with \"set $name credentials username password\"";} + my $presetname = $prop; + my $presetid = $hash->{HELPER}{ALLPRESETS}{$presetname}; + return "Function is coming soon ....(Presetid of $presetname is $presetid )"; + } + else + { + return $setlist; + } +return; } + sub SSCam_Get { my ($hash, @a) = @_; return "\"get X\" needs at least an argument" if ( @a < 2 ); @@ -262,9 +274,10 @@ sub SSCam_Get { my $opt = shift @a; my %SSCam_gets = ( caminfoall => "caminfoall", + svsinfo => "svsinfo", ); my @cList; - + # ist die angegebene Option verfügbar ? if(!defined($SSCam_gets{$opt})) { @@ -273,32 +286,52 @@ sub SSCam_Get { } else { + # sind die Credentials gesetzt ? + if (!$hash->{CREDENTIALS}) {return "Credentials of $name are not set - make sure you've set it with \"set $name credentials username password\"";} + # hier die Verarbeitung starten if ($opt eq "caminfoall") { &getcaminfoall($hash); } + if ($opt eq "svsinfo") + { + &getsvsinfo($hash); + } } return undef; } ###################################################################################### -### check ob alle Recordings = Stop nach Reboot -> sonst stoppen +### initiale Startroutinen nach Restart FHEM -sub recstoponboot ($) { +sub initonboot ($) { my ($hash) = @_; + my $name = $hash->{NAME}; my $logstr; if ($init_done == 1) { + + # check ob alle Recordings = "Stop" nach Reboot -> sonst stoppen if (ReadingsVal($hash->{NAME}, "Record", "Stop") eq "Start") { $logstr = "Recording of $hash->{CAMNAME} seems to be still active after FHEM restart - try to stop it now"; &printlog($hash,$logstr,"1"); &camstoprec($hash); - } + } + + # Konfiguration der Synology Surveillance Station abrufen + if (!$hash->{CREDENTIALS}) { + $logstr = "Credentials of $name are not set - make sure you've set it with \"set $name credentials username password\""; + &printlog($hash,$logstr,"1"); + } + else { + &getsvsinfo($hash); + } } - else { - InternalTimer(gettimeofday(), "recstoponboot", $hash, 0); + else + { + InternalTimer(gettimeofday(), "initonboot", $hash, 0); } return undef; @@ -405,7 +438,6 @@ return ($success, $username, $passwd); } - ###################################################################################### ### Polling Überwachung @@ -491,9 +523,13 @@ sub camstartrec ($) { my $errorcode; my $error; - if (ReadingsVal("$name", "Availability", "enabled") eq "disabled") { - # wenn Kamera disabled ist .... - $errorcode = "402"; + if (ReadingsVal("$name", "state", "") =~ /^dis.*/) { + if (ReadingsVal("$name", "state", "") eq "disabled") { + $errorcode = "402"; + } + elsif (ReadingsVal("$name", "state", "") eq "disconnected") { + $errorcode = "502"; + } # Fehlertext zum Errorcode ermitteln $error = &experror($hash,$errorcode); @@ -536,9 +572,13 @@ sub camstoprec ($) { my $errorcode; my $error; - if (ReadingsVal("$name", "Availability", "enabled") eq "disabled") { - # wenn Kamera disabled ist .... - $errorcode = "402"; + if (ReadingsVal("$name", "state", "") =~ /^dis.*/) { + if (ReadingsVal("$name", "state", "") eq "disabled") { + $errorcode = "402"; + } + elsif (ReadingsVal("$name", "state", "") eq "disconnected") { + $errorcode = "502"; + } # Fehlertext zum Errorcode ermitteln $error = &experror($hash,$errorcode); @@ -581,9 +621,13 @@ sub camexpmode ($) { my $errorcode; my $error; - if (ReadingsVal("$name", "Availability", "enabled") eq "disabled") { - # wenn Kamera disabled ist .... - $errorcode = "402"; + if (ReadingsVal("$name", "state", "") =~ /^dis.*/) { + if (ReadingsVal("$name", "state", "") eq "disabled") { + $errorcode = "402"; + } + elsif (ReadingsVal("$name", "state", "") eq "disconnected") { + $errorcode = "502"; + } # Fehlertext zum Errorcode ermitteln $error = &experror($hash,$errorcode); @@ -611,7 +655,7 @@ sub camexpmode ($) { } else { - InternalTimer(gettimeofday()+0.1, "camstartrec", $hash, 0); + InternalTimer(gettimeofday()+0.25, "camexpmode", $hash, 0); } } @@ -628,9 +672,13 @@ sub camsnap ($) { my $errorcode; my $error; - if (ReadingsVal("$name", "Availability", "enabled") eq "disabled") { - # wenn Kamera disabled ist .... - $errorcode = "402"; + if (ReadingsVal("$name", "state", "") =~ /^dis.*/) { + if (ReadingsVal("$name", "state", "") eq "disabled") { + $errorcode = "402"; + } + elsif (ReadingsVal("$name", "state", "") eq "disconnected") { + $errorcode = "502"; + } # Fehlertext zum Errorcode ermitteln $error = &experror($hash,$errorcode); @@ -753,6 +801,32 @@ sub getcaminfoall ($) { } } +########################################################################### +### allgemeine Infos über Synology Surveillance Station + +sub getsvsinfo ($) { + my ($hash) = @_; + my $camname = $hash->{CAMNAME}; + my $name = $hash->{NAME}; + my $logstr; + + if ($hash->{HELPER}{ACTIVE} ne "on") { + # Kamerainfos abrufen + $logstr = "Retrieval of Surveillance Station related informations starts now"; + &printlog($hash,$logstr,"4"); + + $hash->{OPMODE} = "Getsvsinfo"; + $hash->{HELPER}{ACTIVE} = "on"; + + &getapisites_nonbl($hash); + } + else + { + InternalTimer(gettimeofday()+0.65, "getsvsinfo", $hash, 0); + } + +} + ########################################################################### ### Kamera allgemeine Informationen abrufen (Get), sub von getcaminfoall @@ -896,6 +970,7 @@ sub getapisites_nonbl { my $apicam = $hash->{HELPER}{APICAM}; # mit Komma getrennt angeben my $apitakesnap = $hash->{HELPER}{APISNAPSHOT}; my $apiptz = $hash->{HELPER}{APIPTZ}; + my $apisvsinfo = $hash->{HELPER}{APISVSINFO}; my $logstr; my $url; my $param; @@ -913,7 +988,7 @@ sub getapisites_nonbl { # URL zur Abfrage der Eigenschaften der API's - $url = "http://$serveraddr:$serverport/webapi/query.cgi?api=$apiinfo&method=Query&version=1&query=$apiauth,$apiextrec,$apicam,$apitakesnap,$apiptz"; + $url = "http://$serveraddr:$serverport/webapi/query.cgi?api=$apiinfo&method=Query&version=1&query=$apiauth,$apiextrec,$apicam,$apitakesnap,$apiptz,$apisvsinfo"; $param = { url => $url, @@ -946,6 +1021,7 @@ sub login_nonbl ($) { my $apicam = $hash->{HELPER}{APICAM}; my $apitakesnap = $hash->{HELPER}{APISNAPSHOT}; my $apiptz = $hash->{HELPER}{APIPTZ}; + my $apisvsinfo = $hash->{HELPER}{APISVSINFO}; my $data; my $logstr; my $url; @@ -960,6 +1036,8 @@ sub login_nonbl ($) { my $apitakesnapmaxver; my $apiptzpath; my $apiptzmaxver; + my $apisvsinfopath; + my $apisvsinfomaxver; my $error; my $httptimeout; @@ -1047,7 +1125,7 @@ sub login_nonbl ($) { &printlog($hash, $logstr,"4"); $logstr = defined($apitakesnapmaxver) ? "MaxVersion of $apitakesnap: $apitakesnapmaxver" : "MaxVersion of $apitakesnap undefined - Surveillance Station may be stopped"; &printlog($hash, $logstr,"4"); - + # Pfad und Maxversion von "SYNO.SurveillanceStation.PTZ" ermitteln $apiptzpath = $data->{'data'}->{$apiptz}->{'path'}; @@ -1060,6 +1138,17 @@ sub login_nonbl ($) { $logstr = defined($apiptzmaxver) ? "MaxVersion of $apiptz: $apiptzmaxver" : "MaxVersion of $apiptz undefined - Surveillance Station may be stopped"; &printlog($hash, $logstr,"4"); + # Pfad und Maxversion von "SYNO.SurveillanceStation.Info" ermitteln + + $apisvsinfopath = $data->{'data'}->{$apisvsinfo}->{'path'}; + # Unterstriche im Ergebnis z.B. "_______entry.cgi" eleminieren + $apisvsinfopath =~ tr/_//d if (defined($apisvsinfopath)); + $apisvsinfomaxver = $data->{'data'}->{$apisvsinfo}->{'maxVersion'}; + + $logstr = defined($apisvsinfopath) ? "Path of $apisvsinfo selected: $apisvsinfopath" : "Path of $apisvsinfo undefined - Surveillance Station may be stopped"; + &printlog($hash, $logstr,"4"); + $logstr = defined($apisvsinfomaxver) ? "MaxVersion of $apisvsinfo: $apisvsinfomaxver" : "MaxVersion of $apisvsinfo undefined - Surveillance Station may be stopped"; + &printlog($hash, $logstr,"4"); # ermittelte Werte in $hash einfügen $hash->{HELPER}{APIAUTHPATH} = $apiauthpath; @@ -1072,6 +1161,8 @@ sub login_nonbl ($) { $hash->{HELPER}{APITAKESNAPMAXVER} = $apitakesnapmaxver; $hash->{HELPER}{APIPTZPATH} = $apiptzpath; $hash->{HELPER}{APIPTZMAXVER} = $apiptzmaxver; + $hash->{HELPER}{APISVSINFOPATH} = $apisvsinfopath; + $hash->{HELPER}{APISVSINFOMAXVER} = $apisvsinfomaxver; # Setreading readingsBeginUpdate($hash); @@ -1124,7 +1215,7 @@ sub login_nonbl ($) { $logstr = "HTTP-Call will be done with httptimeout-Value: $httptimeout s"; &printlog($hash,$logstr,"5"); - if (AttrVal($name, "session", undef) eq "SurveillanceStation") { + if (defined(AttrVal($name, "session", undef)) and AttrVal($name, "session", undef) eq "SurveillanceStation") { $url = "http://$serveraddr:$serverport/webapi/$apiauthpath?api=$apiauth&version=$apiauthmaxver&method=Login&account=$username&passwd=$password&session=SurveillanceStation&format=\"sid\""; } else @@ -1264,8 +1355,6 @@ sub getcamid_nonbl ($) { &printlog($hash,$logstr,"5"); # einlesen aller Kameras - Auswertung in Rückkehrfunktion "camop_nonbl" - # $apicammaxver um 1 verringern - Issue in API ! - # if (defined $apicammaxver) {$apicammaxver -= 1}; $url = "http://$serveraddr:$serverport/webapi/$apicampath?api=$apicam&version=$apicammaxver&method=List&basic=true&streamInfo=true&camStm=true&_sid=\"$sid\""; $param = { @@ -1306,6 +1395,9 @@ sub camop_nonbl ($) { my $apiptz = $hash->{HELPER}{APIPTZ}; my $apiptzpath = $hash->{HELPER}{APIPTZPATH}; my $apiptzmaxver = $hash->{HELPER}{APIPTZMAXVER}; + my $apisvsinfo = $hash->{HELPER}{APISVSINFO}; + my $apisvsinfopath = $hash->{HELPER}{APISVSINFOPATH}; + my $apisvsinfomaxver = $hash->{HELPER}{APISVSINFOMAXVER}; my $sid = $hash->{HELPER}{SID}; my $OpMode = $hash->{OPMODE}; my $url; @@ -1466,6 +1558,11 @@ sub camop_nonbl ($) { # eine Kamera wird aktiviert, Rückkehr wird mit "camret_nonbl" verarbeitet $url = "http://$serveraddr:$serverport/webapi/$apicampath?api=$apicam&version=$apicammaxver&method=Disable&cameraIds=$camid&_sid=\"$sid\""; } + elsif ($OpMode eq "Getsvsinfo") + { + # Infos bezüglich Synology Surveillance Station werden ermittelt + $url = "http://$serveraddr:$serverport/webapi/$apisvsinfopath?api=\"$apisvsinfo\"&version=\"$apisvsinfomaxver\"&method=\"GetInfo\"&_sid=\"$sid\""; + } elsif ($OpMode eq "Getcaminfo") { # Infos einer Kamera werden abgerufen, Rückkehr wird mit "camret_nonbl" verarbeitet @@ -1536,6 +1633,7 @@ sub camret_nonbl ($) { my $deviceType; my $camStatus; my ($presetcnt,$cnt,%allpresets,$presid,$presname,@preskeys,$presetlist); + my ($userPriv,%version); my $verbose; my $httptimeout; @@ -1706,6 +1804,59 @@ sub camret_nonbl ($) { $logstr = "--- End Function cam: $OpMode nonblocking ---"; &printlog($hash,$logstr,"4"); } + elsif ($OpMode eq "Getsvsinfo") + { + # Parse SVS-Infos + $userPriv = $data->{'data'}{'userPriv'}; + if (defined($userPriv)) { + if ($userPriv eq "0") { + $userPriv = "No Accss"; + } + elsif ($userPriv eq "1") { + $userPriv = "Admin"; + } + elsif ($userPriv eq "2") { + $userPriv = "Manager"; + } + elsif ($userPriv eq "4") { + $userPriv = "Viewer"; + } + } + + %version = ( + MAJOR => $data->{'data'}{'version'}{'major'}, + MINOR => $data->{'data'}{'version'}{'minor'}, + BUILD => $data->{'data'}{'version'}{'build'} + ); + + if (!exists($data->{'data'}{'customizedPortHttp'})) { + delete $defs{$name}{READINGS}{SVScustomPortHttp}; + } + + if (!exists($data->{'data'}{'customizedPortHttps'})) { + delete $defs{$name}{READINGS}{SVScustomPortHttps}; + } + + # Setreading + readingsBeginUpdate($hash); + readingsBulkUpdate($hash,"SVScustomPortHttp",$data->{'data'}{'customizedPortHttp'}); + readingsBulkUpdate($hash,"SVScustomPortHttps",$data->{'data'}{'customizedPortHttps'}); + readingsBulkUpdate($hash,"SVSlicenseNumber",$data->{'data'}{'liscenseNumber'}); + readingsBulkUpdate($hash,"SVSuserPriv",$userPriv); + readingsBulkUpdate($hash,"SVSversion",$data->{'data'}{'version'}{'major'}.".".$data->{'data'}{'version'}{'minor'}."-".$data->{'data'}{'version'}{'build'}); + readingsBulkUpdate($hash,"Errorcode","none"); + readingsBulkUpdate($hash,"Error","none"); + readingsEndUpdate($hash, 1); + + # Werte in $hash zur späteren Auswertung einfügen + $hash->{HELPER}{SVSVERSION} = \%version; + + # Logausgabe + $logstr = "Informations related to Surveillance Station retrieved successfully"; + &printlog($hash,$logstr,"3"); + $logstr = "--- End Function $OpMode nonblocking ---"; + &printlog($hash,$logstr,"4"); + } elsif ($OpMode eq "Getcaminfo") { # Parse Caminfos @@ -1745,10 +1896,11 @@ sub camret_nonbl ($) { } elsif ($camStatus eq "3") { $camStatus = "disconnected"; + readingsSingleUpdate($hash,"state", "disconnected", 0); } elsif ($camStatus eq "7") { $camStatus = "disabled"; - readingsSingleUpdate($hash,"state", "disable", 0); + readingsSingleUpdate($hash,"state", "disable ", 0); } else { $camStatus = "other"; @@ -2017,7 +2169,7 @@ sub camret_nonbl ($) { $logstr = "HTTP-Call will be done with httptimeout-Value: $httptimeout s"; &printlog($hash,$logstr,"5"); - if (AttrVal($name, "session", undef) eq "SurveillanceStation") { + if (defined(AttrVal($name, "session", undef)) and AttrVal($name, "session", undef) eq "SurveillanceStation") { $url = "http://$serveraddr:$serverport/webapi/$apiauthpath?api=$apiauth&version=$apiauthmaxver&method=Logout&session=SurveillanceStation&_sid=$sid"; } else @@ -2218,6 +2370,7 @@ sub experror { 418 => "Object is not exist", 419 => "Visualstation name repetition", 439 => "Too many items selected", + 502 => "Camera disconnected", ); unless (exists ($errorlist {$errorcode})) {$error = "Message for Errorode $errorcode not found. Please turn to Synology Web API-Guide."; return ($error);} @@ -2256,7 +2409,7 @@ return;
  • Trigger a Snapshot
  • Deaktivate a Camera in Synology Surveillance Station
  • Activate a Camera in Synology Surveillance Station
    • -
  • Retrieval of Camera Properties (Polling)

    • +
  • Retrieval of Camera Properties (also by Polling) as well as informations about the installed SVS-package

    • The recordings and snapshots will be stored in Synology Surveillance Station (SVS) and are managed like the other (normal) recordings / snapshots defined by Surveillance Station rules.
    @@ -2320,7 +2473,7 @@ return; If you have specified a pre-recording time in SVS it will be considered too.


    - + Credentials

    After a camera-device is defined, firstly it is needed to save the credentials. This will be done with command: @@ -2360,6 +2513,7 @@ return;
  • set ... enable session: ServeillanceStation - manager
  • set ... credentials -
  • get ... caminfoall session: ServeillanceStation - observer
    • +
  • get ... svsinfo session: ServeillanceStation - observer


    • @@ -2457,11 +2611,15 @@ return; With SSCam the properties of defined Cameras could be retrieved. It could be done by using the command: 
           get <name> caminfoall
+      get <name> svsinfo
    - Dependend from the type of Camera (e.g. Fix- or PTZ-Camera) the available properties will be retrieved and provided as Readings.
    - For example the Reading "Availability" will be set to "disconnected" if the Camera would be disconnected from Synology Surveillance Station and can be used for further
    - processing like crearing events.

    + With command "get <name> caminfoall" dependend of the type of Camera (e.g. Fix- or PTZ-Camera) the available properties will be retrieved and provided as Readings.
    + For example the Reading "Availability" will be set to "disconnected" if the Camera would be disconnected from Synology Surveillance Station and can be used for further + processing like creating events.
    + The command "get <name> svsinfo" is not really dependend on a camera, but rather a command to determine common informations about the installed SVS-version and other properties.
    + This function will be executed automatically once-only after a restart of FHEM. Please consider to save the credentials what will be used for login to DSM or SVS ! +

    Polling of Camera-Properties:

    @@ -2553,7 +2711,12 @@ return;
  • Patrols
    • - in Synology Surveillance Station predefined patrols (at PTZ-Cameras)
  • PollState
    • - shows the state of automatic polling
  • Presets
    • - in Synology Surveillance Station predefined Presets (at PTZ-Cameras) -
  • Record
    • - if recording is running = Start, if no recording is running = Stop +
  • Record
    • - if recording is running = Start, if no recording is running = Stop +
  • SVScustomPortHttp
    • - Customized port of Surveillance Station (HTTP) (to get with "svsinfo") +
  • SVScustomPortHttps
    • - Customized port of Surveillance Station (HTTPS) (to get with "svsinfo") +
  • SVSlicenseNumber
    • - The total number of installed licenses (to get with "svsinfo") +
  • SVSuserPriv
    • - The effective rights of the user used for log in (to get with "svsinfo") +
  • SVSversion
    • - package version of the installed Surveillance Station (to get with "svsinfo")
  • UsedSpaceMB
    • - used disk space of recordings by Camera @@ -2619,7 +2782,7 @@ return;
  • Aufnehmen eines Schnappschusses und Ablage in der Synology Surveillance Station
  • Deaktivieren einer Kamera in Synology Surveillance Station
  • Aktivieren einer Kamera in Synology Surveillance Station
    • -
  • Abfrage von Kameraeigenschaften (Polling)

    • +
  • Abfrage von Kameraeigenschaften (auch mit Polling) sowie den Eigenschaften des installierten SVS-Paketes

    • Die Aufnahmen stehen in der Synology Surveillance Station (SVS) zur Verfügung und unterliegen, wie jede andere Aufnahme, den in der Synology Surveillance Station eingestellten Regeln.
    @@ -2679,7 +2842,7 @@ return; Eine eventuell in der SVS eingestellte Dauer der Voraufzeichnung wird weiterhin berücksichtigt.


    - + Credentials

    Nach dem Definieren des Gerätes müssen zuerst die Zugangsrechte gespeichert werden. Das geschieht mit dem Befehl: @@ -2719,6 +2882,7 @@ return;
  • set ... enable session: ServeillanceStation - Manager
  • set ... credentials -
  • get ... caminfoall session: ServeillanceStation - Betrachter
    • +
  • get ... svsinfo session: ServeillanceStation - Betrachter


    • @@ -2816,11 +2980,15 @@ return; Mit SSCam können die Eigenschaften der Kameras aus der Surveillance Station abgefragt werden. Dazu steht der Befehl zur Verfügung: 
           get <name> caminfoall
+      get <name> svsinfo
    - Abhängig von der Art der Kamera (z.B. Fix- oder PTZ-Kamera) werden die verfügbaren Eigenschaften ermittelt und als Readings zur Verfügung gestellt.
    + Mit dem Befehl "get <name> caminfoall" werden abhängig von der Art der Kamera (z.B. Fix- oder PTZ-Kamera) die verfügbaren Eigenschaften ermittelt und als Readings zur Verfügung gestellt.
    So wird zum Beispiel das Reading "Availability" auf "disconnected" gesetzt falls die Kamera von der Surveillance Station getrennt wird und kann für weitere
    - Verarbeitungen genutzt werden.

    + Verarbeitungen genutzt werden.
    + Der Befehl "get <name> svsinfo" ist eigentlich nicht von der Kamera abhängig, sondern ermittelt vielmehr allgemeine Informationen zur installierten SVS-Version und andere Eigenschaften.
    + Diese Funktion wird einmalig automatschisch nach einem Restart von FHEM ausgeführt. Es ist darauf zu achten dass die Credentials gespeichert wurden ! +

    Polling der Kameraeigenschaften:

    @@ -2914,7 +3082,12 @@ return;
  • Patrols
    • - in Surveillance Station voreingestellte Überwachungstouren (bei PTZ-Kameras)
  • PollState
    • - zeigt den Status des automatischen Pollings an
  • Presets
    • - in Surveillance Station voreingestellte Positionen (bei PTZ-Kameras) -
  • Record
    • - Aufnahme läuft = Start, keine Aufnahme = Stop +
  • Record
    • - Aufnahme läuft = Start, keine Aufnahme = Stop +
  • SVScustomPortHttp
    • - benutzerdefinierter Port der Surveillance Station (HTTP) im DSM-Anwendungsportal (get mit "svsinfo") +
  • SVScustomPortHttps
    • - benutzerdefinierter Port der Surveillance Station (HTTPS) im DSM-Anwendungsportal (get mit "svsinfo") +
  • SVSlicenseNumber
    • - die Anzahl der installierten Kameralizenzen (get mit "svsinfo") +
  • SVSuserPriv
    • - die effektiven Rechte des verwendeten Users nach dem Login (get mit "svsinfo") +
  • SVSversion
    • - die Paketversion der installierten Surveillance Station (get mit "svsinfo")
  • UsedSpaceMB
    • - durch Aufnahmen der Kamera belegter Plattenplatz auf dem Volume